CLFMM - C-14A CYCLEWELD
- MSDS: CLFMM
- Manufacturer: FIBER RESIN CORP H B FULLER COMPANY SUBSIDIARY
- Product Name: C-14A CYCLEWELD
- National Stock Number: 8040-00-894-2269
Product Identification
Product ID:C-14A CYCLEWELD
MSDS Date:11/05/1997
FSC:8040
NIIN:00-894-2269
Status Code:A
MSDS Number: CLFMM
Responsible Party
CHATSWORTH, CA 91311
US
Emergency Phone: 1-888-853-1758
Info Phone: 818-882-3022
Preparer: ERNEST CARTER
Cage: 26348
Contractor
Telephone: 818-882-3022
Cage: 26348
Ingredients
EPOXY RESIN
POLYSULFIDE LIQUID POLYMER
CAS: 68611-50-7
Hazards
LD50 LC50 Mixture:NONE
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:EYES: EYE CONTACT WITH LIQUID PRODUCT
WILL CAUSE IRRITATION. SKIN: EPOXY RESINS ARE POTENTIAL SKIN
SENSITIZERS. INHALATION: INHALATION IS NOT AN ANTICIPATED ROUTE OF
EXPOSURE. INGESTION: HARMFUL IF S WALLOWED.
Explanation of Carcinogenicity:NONE
Medical Cond Aggravated by Exposure:
First Aid
First Aid:IF IN EYE: FLUSH IMMEDIATELY WITH WATER FOR 15 MINUTES.
CONSULT A PHYSICIAN. IF ON SKIN: WASH AFFECTED AREA WITH SOAP AND
WATER. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE. IF INGESTED: IF
PERSON CAN SWALLOW, GIVE ONE GLASS OF WATER OR MILK. DO NOT INDUCE
VOMITING. GET IMMEDIATE MEDICAL ATTENTION.
Fire Fighting
Flash Point Method:CALC
Flash Point:=204.4C, 400.F
Autoignition Temp:Autoignition Temp Text:NONE
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:USE WATER SPRAY, FOAM, DRY CHEMICAL OR CARBON
DIOXIDE.
Fire Fighting Procedures:PERSONS EXPOSED TO PRODUCTS OF COMBUSTION
SHOULD WEAR SELF CONTAINED BREATHING APPARATUS AND FULL PROTECTIVE
EQUIPMENT.
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:WEAR RUBBER GLOVES AND WIPE UP WITH ABSORBENT
MATERIAL. ERSIDUE MAY BE REMOVED WITH A CHLORINATED SOLVENT.
Neutralizing Agent:NONE
Handling
Handling and Storage Precautions:AVOID SKIN CONTACT WITH PRODUCT AT ALL
TIMES. CONSULT THE TECHNICAL DATA SHEET FOR SPECIFIC STORAGE
INSTRUCTIONS.
Other Precautions:NONE
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR IF CONDITIONS
WARRANT.
Ventilation:GENERAL DILUTION VENTILATION.
Protective Gloves:PREVENT CONTACT BY USING RUBBER GLOVES.
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:NONE
Work Hygienic Practices:NONE
Supplemental Safety and Health
NONE
Chemical Properties
Boiling Pt:B.P. Text:NONE
Melt/Freeze Pt:M.P/F.P Text:NONE
Decomp Temp:Decomp Text:NONE
Spec Gravity:1.16
VOC Grams/Liter:9.7
Stability
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:SULFUR COMPOUNDS.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:SOLIDIFY AND DISPOSE OF IN AN APPROVED LANDFILL.
CONSULT STATE, LOCAL OR PROVINCIAL AUTHORITIES FOR MORE RESTRICTIVE
REQUIREMENTS.
Other Information
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Regulatory
SARA Title III Information:NONE
Federal Regulatory Information:TOXIC SUBSTANCES CONTROL ACT (TSCA)
SECTION 8 (B) - INVENTORY STATUS THIS PRODUCT IS IN COMPLIANCE
WITH THE TOXIC SUBSTANCES CONTROL ACT'S INVENTORY REQUIREMENTS.
State Regulatory Information: